Unplug the camera from network, hold down the reset button, then plug back in, keep holding button for 20 secs. > Release button> shortly afterward you will hear the IR turn on.

Scan network to get IP, camera usually defaults to 192.168.1.108

Navigate to IP address in browser (Use Microsoft Edge)

Log using default password:

admin

12345

Once inside click Setup> network> TCP/IP> change to DHCP

Camera will lose connectivity and receive a new IP > scan network using IP Scanner to get new IP address or Ubiquiti

Navigate to that address log in> click Setup> Account> from here change admin password to stronger password.

Login again.

So, in order to see live view, you will need to download the plug-in, you will click this link on the camera live view itself.

Download extension, it should be named webplugin.exe > Double click to install.

Navigate to this setting inside the Edge browser: edge://settings/defaultBrowser

(pic below)

Click allow > then click “add a page” > put in the camera IP